With the target circles marked, the next step is to cut out the 4" target circles using a jig saw.
To begin, drill a pilot hole inside each of the six cutouts using a 1/2" paddle bit in your power drill. Then, carefully cut out the six circles using your jig saw. Go slowly and complete the six cuts as cleanly and evenly as you can.
Play Washers - Build a Set of Washer Boxes
By Chris Baylor, About.com
Cut Out the Target Circles
Cut Out the Target Circles
(c) 2007 Chris Baylor licensed to About.com, Inc.Prev
- Build a Set of Washer Boxes
- Cut the Stock to Size
- Connect the Sides and End Pieces
- Add a Cross-Member
- Attach the Plywood Playing Surface
- Mark the Target Circles on the Plywood
- Cut Out the Target Circles
- Attach the U-Bolts
- Attach the Chain Spacer
- Play Washers!
Free Woodworking Plans
Woodworking Tools
Explore Woodworking
Must Reads
About.com Special Features
Scrapbook Technique Gallery
Use these ideas to inspire your own uniquely beautiful pages. More >
Price Your Collectibles
Find out how much your treasured collection is worth. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.