Now that the structure of each box is complete, the next step of these free woodworking plans is to attach the plywood playing surface to the top of the boxes. For this, we'll need a piece of 3/4" thick AC grade plywood cut to 12" wide by 48" long. If you need to cut the pieces out of a full sheet, use your circular saw and a straight edge or run them through a table saw.
Attach the plywood to the top of the box structure (with the smooth side up) using some 1-5/8" deck screws.
Play Washers - Build a Set of Washer Boxes
By Chris Baylor, About.com Guide
Attach the Plywood Playing Surface
Attach the Playing Surface
(c) 2007 Chris Baylor licensed to About.com, Inc.Prev
- Build a Set of Washer Boxes
- Cut the Stock to Size
- Connect the Sides and End Pieces
- Add a Cross-Member
- Attach the Plywood Playing Surface
- Mark the Target Circles on the Plywood
- Cut Out the Target Circles
- Attach the U-Bolts
- Attach the Chain Spacer
- Play Washers!
Free Woodworking Plans
Woodworking Tools
Explore Woodworking
Must Reads
About.com Special Features
Holiday Central
What to eat, where to go, fun things to do and how to save money on the perfect gifts. More >
Scrapbook Technique Gallery
Use these ideas to inspire your own uniquely beautiful pages. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.