Play Washers - Build a Set of Washer Boxes
By Chris Baylor, About.com Guide
Cut the Stock to Size
Cut 2x6 Stock to Size
(c) 2007 Chris Baylor licensed to About.com, Inc.
To begin building this woodworking project, you'll need to cut four pieces of pressure treated 2x6 lumber to 48" in length. You'll also need six pieces of the same 2x6 lumber cut to 9" in length. These ten pieces of stock will be enough to build the structure of two boxes.
Prev
- Build a Set of Washer Boxes
- Cut the Stock to Size
- Connect the Sides and End Pieces
- Add a Cross-Member
- Attach the Plywood Playing Surface
- Mark the Target Circles on the Plywood
- Cut Out the Target Circles
- Attach the U-Bolts
- Attach the Chain Spacer
- Play Washers!
Free Woodworking Plans
Woodworking Tools
Explore Woodworking
Must Reads
About.com Special Features
Holiday Central
What to eat, where to go, fun things to do and how to save money on the perfect gifts. More >
Scrapbook Technique Gallery
Use these ideas to inspire your own uniquely beautiful pages. More >
©2009 About.com, a part of The New York Times Company.
All rights reserved.